9 material differences · fewer than 12

Tractor oneLandini 5860 (DT) TL-22 N/K (TL-22 DT/K)1988–2000No measured PTO figureTractor twoMassey Ferguson MF 342 (A)1993–1997No measured PTO figure

Which should you choose?

Read our verdict on the 5860 (DT) TL-22 N/K (TL-22 DT/K) and the MF 342 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 7 fields identical or within 5%, which is not counted as material

Landini 5860 (DT) TL-22 N/K (TL-22 DT/K) and Massey Ferguson MF 342 (A), field by field
Field5860 (DT) TL-22 N/K (TL-22 DT/K)MF 342 (A)Gap
Engine
Engine power, claimed claimed46.4 hp46.4 hp—
Engine declaredPerkins AD 3.152 SPerkins AD 3.152differs
Displacement declared2.50 L2.50 L—
Maximum torque declared124 lb·ft · 168 N·m117 lb·ft · 158 N·m+6% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declaredDry and air-cooled LuK double clutchPedal-operated, dry and air-cooled LuK single clutchdiffers
Hydraulics & hitch
Pump flow declared10.0 gpm · 37.9 L/min15.1 gpm · 57.0 L/min+50% MF 342 (A)
Pressure declared2,756 psi · 190 bar2,031 psi · 140 bar+36% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Three-point lift, at the coupling points declared4,497 lb · 2,040 kg4,729 lb · 2,145 kg—
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared4,960 lb · 2,250 kg5,401 lb · 2,450 kg+9% MF 342 (A)
Wheelbase declared83.7 in · 2,126 mm81.9 in · 2,080 mm—
Length declared139.4 in · 3,540 mm140.0 in · 3,556 mm—
Width declared71.5 in · 1,815 mm70.9 in · 1,802 mm—
Ground clearance declared17.1 in · 435 mm15.0 in · 380 mm+14% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Turning radius, braked declared11.3 ft · 3.44 m——
Fuel tank declared90.9 qt · 86.0 L71.9 qt · 68.0 L+26% 5860 (DT) TL-22 N/K (TL-22 DT/K)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Landini 5860 (DT) TL-22 N/K (TL-22 DT/K) sources

Source
  • Source: Traktorenlexikon, “Landini 5860”
  • Source: Traktorenlexikon, “Massey Ferguson MF 255”

Massey Ferguson MF 342 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 342”
  • Source: Traktorenlexikon, “Massey Ferguson MF 148”