Landini R-5000 Special (TL 14 N/A) or SOMECA 550 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R-5000 Special (TL 14 N/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini R-5000 Special (TL 14 N/A) suits loader and hydraulic implement work better on this data: 20% (4.4 L/min / 1.2 gpm) more hydraulic flow.
  • The SOMECA 550 (DT) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
  • The Landini R-5000 Special (TL 14 N/A) suits road haulage better on this data: 25% (6.0 km/h / 3.7 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini R-5000 Special (TL 14 N/A) and SOMECA 550 (DT), with the call on each
QuestionR-5000 Special (TL 14 N/A)550 (DT)Call
Which puts more power through the PTO shaft?38.2 kW (51.2 hp)Traktorenlexikon, “Landini 5000”38.2 kW (51.2 hp)Traktorenlexikon, “Someca 550”Not comparableNot comparable on power at the PTO shaft: the R-5000 Special (TL 14 N/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the R-5000 Special (TL 14 N/A) and the 550 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the R-5000 Special (TL 14 N/A) and the 550 (DT).
Which pumps more oil for implements?26.2 L/min (6.9 gpm)Traktorenlexikon, “Landini 5000”21.8 L/min (5.8 gpm)Traktorenlexikon, “Someca 550”AheadThe Landini R-5000 Special (TL 14 N/A) has 20% more hydraulic flow (4.4 L/min / 1.2 gpm) than the SOMECA 550 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,100 kg (2,425 lb)Traktorenlexikon, “Landini 5000”1,450 kg (3,197 lb)Traktorenlexikon, “Someca 550”Not comparableNot comparable on three-point lift: the R-5000 Special (TL 14 N/A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Landini 5000”); the 550 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 550”) — not the same quantity, basis and condition.
Which is heavier, for traction?1,890 kg (4,167 lb)Traktorenlexikon, “Landini 5000”2,060 kg (4,542 lb)Traktorenlexikon, “Someca 550”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the R-5000 Special (TL 14 N/A) and the 550 (DT).
Which has the wider choice of gears?12Traktorenlexikon, “Landini 5000”8 to 12Traktorenlexikon, “Someca 550”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the R-5000 Special (TL 14 N/A) and the 550 (DT).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini 5000”24 km/h (14.9 mph)Traktorenlexikon, “Someca 550”AheadThe Landini R-5000 Special (TL 14 N/A) has 25% more top speed (6.0 km/h / 3.7 mph) than the SOMECA 550 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Landini 5000”540 rpmTraktorenlexikon, “Someca 550”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the R-5000 Special (TL 14 N/A) and the 550 (DT).
Which drives on both axles?2WDTraktorenlexikon, “Landini 5000”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 550”AheadThe SOMECA 550 (DT) is available with four-wheel drive; the Landini R-5000 Special (TL 14 N/A) is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1968–19741968–1971EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini R-5000 Special (TL 14 N/A) has 20% more hydraulic flow (4.4 L/min / 1.2 gpm) than the SOMECA 550 (DT) (both pump flow, as stated by the source).
  • The Landini R-5000 Special (TL 14 N/A) has 25% more top speed (6.0 km/h / 3.7 mph) than the SOMECA 550 (DT) (both top speed forward, as stated by the source).
  • The SOMECA 550 (DT) is available with four-wheel drive; the Landini R-5000 Special (TL 14 N/A) is two-wheel drive (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the R-5000 Special (TL 14 N/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 550 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the R-5000 Special (TL 14 N/A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Landini 5000”); the 550 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Someca 550”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources