Landini 14.500 (DT) "TL 24 N/G" vs VALMET 8200

11 material differences · fewer than 12

Tractor one

1978–1993

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 14.500 (DT) "TL 24 N/G" and the 8200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Landini 14.500 (DT) "TL 24 N/G" and VALMET 8200, field by field
Field	14.500 (DT) "TL 24 N/G"	8200	Gap
Engine
Engine power, claimed claimed	130.2 hp	128.2 hp	—
Engine declared	Perkins AT 6.354.4	VALMET 634 D	differs
Displacement declared	5.80 L	7.37 L	+27% 8200
Maximum torque declared	359 lb·ft · 487 N·m	361 lb·ft · 490 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry LUK double clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	16.4 gpm · 62.0 L/min	17.8 gpm · 67.4 L/min	+9% 8200
Pressure declared	—	2,901 psi · 200 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,530 lb · 5,230 kg	10,362 lb · 4,700 kg	+11% 14.500 (DT) "TL 24 N/G"
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	111.8 in · 2,840 mm	100.7 in · 2,558 mm	+11% 14.500 (DT) "TL 24 N/G"
Length declared	183.5 in · 4,660 mm	186.8 in · 4,745 mm	—
Width declared	91.7 in · 2,330 mm	86.6 in · 2,200 mm	+6% 14.500 (DT) "TL 24 N/G"
Height declared	114.6 in · 2,910 mm	108.7 in · 2,760 mm	+5% 14.500 (DT) "TL 24 N/G"
Ground clearance declared	20.1 in · 510 mm	18.7 in · 475 mm	+7% 14.500 (DT) "TL 24 N/G"
Turning radius, braked declared	—	15.5 ft · 4.71 m	—
Fuel tank declared	190.2 qt · 180.0 L	174.4 qt · 165.0 L	+9% 14.500 (DT) "TL 24 N/G"

Source

Source