7 material differences · fewer than 12
Tractor oneLandini 14.500 (DT) "TL 24 N/G"1978–1993No measured PTO figureTractor twoMassey Ferguson MF 3635 (A)1990–1995No measured PTO figure
Which should you choose?
Read our verdict on the 14.500 (DT) "TL 24 N/G" and the MF 3635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 14.500 (DT) "TL 24 N/G" | MF 3635 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 130.2 hp | 130.3 hp | — |
| Engine declared | Perkins AT 6.354.4 | Perkins 1006-6 THR 2 | differs |
| Displacement declared | 5.80 L | 5.99 L | — |
| Maximum torque declared | 359 lb·ft · 487 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry LUK double clutch | Pedal-operated, dry and air-cooled VALEO single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 16.4 gpm · 62.0 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,530 lb · 5,230 kg | 13,106 lb · 5,945 kg | +14% MF 3635 (A) |
| Maximum permissible mass declared | — | 19,842 lb · 9,000 kg | — |
| Wheelbase declared | 111.8 in · 2,840 mm | 109.3 in · 2,777 mm | — |
| Length declared | 183.5 in · 4,660 mm | 183.0 in · 4,649 mm | — |
| Width declared | 91.7 in · 2,330 mm | 82.2 in · 2,088 mm | +12% 14.500 (DT) "TL 24 N/G" |
| Ground clearance declared | 20.1 in · 510 mm | 16.9 in · 428 mm | +19% 14.500 (DT) "TL 24 N/G" |
| Fuel tank declared | 190.2 qt · 180.0 L | 306.4 qt · 290.0 L | +61% MF 3635 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 14.500 (DT) "TL 24 N/G" sources
- Source: Traktorenlexikon, “Landini 14500”
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”
Massey Ferguson MF 3635 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3635”