7 material differences · fewer than 12
Tractor oneLandini 12.500 (DT)1978–1990No measured PTO figureTractor twoSAME Laser 110 (DT)1983–1996No measured PTO figure
Which should you choose?
Read our verdict on the 12.500 (DT) and the Laser 110 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 12.500 (DT) | Laser 110 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 107.5 hp | — |
| Engine declared | Perkins A 6.354 | SAME 1006 P | differs |
| Displacement declared | 5.80 L | 5.66 L | — |
| Maximum torque declared | 276 lb·ft · 374 N·m | 269 lb·ft · 365 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry LUK dual clutch | Pedal operated dry SAME single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 16.4 gpm · 62.0 L/min | 16.9 gpm · 64.0 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,604 lb · 4,810 kg | 9,568 lb · 4,340 kg | +11% 12.500 (DT) |
| Wheelbase declared | 111.8 in · 2,840 mm | 108.9 in · 2,767 mm | — |
| Length declared | 184.6 in · 4,690 mm | 158.9 in · 4,035 mm | +16% 12.500 (DT) |
| Width declared | 97.2 in · 2,470 mm | 83.5–107.5 in · 2,120–2,730 mm | differs |
| Ground clearance declared | 17.7 in · 450 mm | 23.6 in · 600 mm | +33% Laser 110 (DT) |
| Turning radius, braked declared | — | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 137.4 qt · 130.0 L | +38% 12.500 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 12.500 (DT) sources
- Source: Traktorenlexikon, “Landini 12500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”
SAME Laser 110 (DT) sources
- Source: Traktorenlexikon, “SAME Laser 110”