Lamborghini Rubin 150 vs Steyr 8180 a

12 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the Rubin 150 and the 8180 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Lamborghini Rubin 150 and Steyr 8180 a, field by field
Field	Rubin 150	8180 a	Gap
Engine
Engine power, claimed claimed	147.9 hp	158.0 hp	+7% 8180 a
Engine declared	SAME-DEUTZ-FAHR 1000.6 WTI-1	Steyr WD 612.96	differs
Displacement declared	6.00 L	6.60 L	+10% 8180 a
Maximum torque declared	445 lb·ft · 604 N·m	466 lb·ft · 632 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulically operated wet multi-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	18.6 gpm · 70.5 L/min	13.8 gpm · 52.4 L/min	+35% Rubin 150
Pressure declared	3,046 psi · 210 bar	3,553 psi · 245 bar	+17% 8180 a
Three-point lift at ends declared	18,960 lb · 8,600 kg	14,595 lb · 6,620 kg	+30% Rubin 150
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	15,091 lb · 6,845 kg	13,254 lb · 6,012 kg	+14% Rubin 150
Maximum permissible mass declared	23,149 lb · 10,500 kg	18,739 lb · 8,500 kg	+24% Rubin 150
Wheelbase declared	108.3 in · 2,750 mm	106.3 in · 2,700 mm	—
Length declared	183.9 in · 4,670 mm	201.8 in · 5,125 mm	+10% 8180 a
Width declared	96.5 in · 2,450 mm	97.2 in · 2,470 mm	—
Height declared	113.4 in · 2,880 mm	113.4 in · 2,880 mm	—
Ground clearance declared	20.5 in · 520 mm	19.9 in · 505 mm	—
Turning radius, braked declared	13.1 ft · 3.99 m	16.3 ft · 4.97 m	+25% 8180 a
Fuel tank declared	401.5 qt · 380.0 L	253.6 qt · 240.0 L	+58% Rubin 150

Source

Source