7 material differences · fewer than 12
Tractor oneLamborghini R8.270from 2007No measured PTO figureTractor twoNew Holland T 80302006–2011No measured PTO figure
Which should you choose?
Read our verdict on the R8.270 and the T 8030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R8.270 | T 8030 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 266 hp | 269.3 hp | — |
| Engine declared | — | CUMMINS 6 TAA-8304 (TIER-III) | — |
| Displacement declared | — | 8.27 L | — |
| Maximum torque declared | — | 861 lb·ft · 1,167 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Electro-hydraulically operated wet multi-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 44.0 gpm · 166.6 L/min | — |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,790–23,005 lb · 9,430–10,435 kg | 21,711 lb · 9,848 kg | differs |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 121.9 in · 3,095 mm | 121.2 in · 3,078 mm | — |
| Length declared | 207.4 in · 5,268 mm | 229.5 in · 5,829 mm | +11% T 8030 |
| Width declared | 108.3 in · 2,750 mm | 98.0 in · 2,490 mm | +10% R8.270 |
| Ground clearance declared | 23.6 in · 600 mm | 14.6 in · 372 mm | +61% R8.270 |
| Fuel tank declared | 618.2 qt · 585 L | 720.7 qt · 682.0 L | +17% T 8030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R8.270 sources
- Source: Traktorenlexikon, “Lamborghini R8.270”
New Holland T 8030 sources
- Source: Traktorenlexikon, “New Holland T8030”
- Source: Traktorenlexikon, “New Holland T8040”