9 material differences · fewer than 12
Tractor oneLamborghini R-804 (DT)1976–1982No measured PTO figureTractor twoLandini 7800-Turbo (DT)1987–2000No measured PTO figure
Which should you choose?
Read our verdict on the R-804 (DT) and the 7800-Turbo (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-804 (DT) | 7800-Turbo (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 82.9 hp | 82.9 hp | — |
| Engine declared | LAMBORGHINI FL-1104/2 | Perkins LT 4.236 | differs |
| Displacement declared | 4.56 L | 3.86 L | +18% R-804 (DT) |
| Maximum torque declared | — | 237 lb·ft · 322 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 7800-Turbo (DT) |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 13.5 gpm · 51.0 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,327 lb · 2,870 kg | 8,411 lb · 3,815 kg | +33% 7800-Turbo (DT) |
| Wheelbase declared | 89.8 in · 2,280 mm | 93.3 in · 2,371 mm | — |
| Length declared | 131.9 in · 3,350 mm | 157.1 in · 3,990 mm | +19% 7800-Turbo (DT) |
| Width declared | 68.5–96.1 in · 1,740–2,440 mm | 81.5 in · 2,070 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 13.1 in · 332 mm | +39% R-804 (DT) |
| Fuel tank declared | 63.4 qt · 60.0 L | 156.4 qt · 148.0 L | +147% 7800-Turbo (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-804 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 804 DT”
Landini 7800-Turbo (DT) sources
- Source: Traktorenlexikon, “Landini 7800 DT Turbo”