11 material differences · fewer than 12
Tractor oneLamborghini R-704 (DT)1976–1982No measured PTO figureTractor twoSAME Centurion 75 (DT)1978–1985No measured PTO figure
Which should you choose?
Read our verdict on the R-704 (DT) and the Centurion 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-704 (DT) | Centurion 75 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 72.0 hp | — |
| Engine declared | LAMBORGHINI FL-1104/1 | SAME DA 1054 P | differs |
| Displacement declared | 4.56 L | 4.15 L | +10% R-704 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Dry LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.4 gpm · 24.2 L/min | 5.8 gpm · 22.0 L/min | +10% R-704 (DT) |
| Pressure declared | 2,418 psi · 167 bar | 2,973 psi · 205 bar | +23% Centurion 75 (DT) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,975 lb · 2,710 kg | 7,209 lb · 3,270 kg | +21% Centurion 75 (DT) |
| Wheelbase declared | 89.8 in · 2,280 mm | 91.3 in · 2,320 mm | — |
| Length declared | 131.9 in · 3,350 mm | 151.2 in · 3,840 mm | +15% Centurion 75 (DT) |
| Width declared | 68.5–96.1 in · 1,740–2,440 mm | 76.0–95.7 in · 1,930–2,430 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 20.9 in · 530 mm | +15% Centurion 75 (DT) |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 126.8 qt · 120.0 L | +100% Centurion 75 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-704 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 704 DT”
SAME Centurion 75 (DT) sources
- Source: Traktorenlexikon, “SAME Centurion 75”
- Source: Traktorenlexikon, “SAME Leopard 85”