Lamborghini R-603 (DT) or Steyr 8065 (a)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8065 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R-603 (DT) and Steyr 8065 (a), with the call on each
QuestionR-603 (DT)8065 (a)Call
Which puts more power through the PTO shaft?41.2 kW (55.3 hp)Traktorenlexikon, “Lamborghini R 603 DT”41.2 kW (55.3 hp)Traktorenlexikon, “Steyr 8065”Not comparableNot comparable on power at the PTO shaft: the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8065 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the R-603 (DT) and the 8065 (a).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the R-603 (DT) and the 8065 (a).
Which pumps more oil for implements?18.5 L/min (4.9 gpm)Traktorenlexikon, “Lamborghini R 603 DT”—No figureNo call on hydraulic flow: no figure on record for the 8065 (a).
Which lifts more on the three-point hitch?—2,600 kg (5,732 lb)Traktorenlexikon, “Steyr 8065”No figureNo call on three-point lift: no figure on record for the R-603 (DT).
Which is heavier, for traction?1,900 kg (4,189 lb)Traktorenlexikon, “Lamborghini R 603 DT”2,435 kg (5,368 lb)Traktorenlexikon, “Steyr 8065”Ahead (a fact, not an advantage)The Steyr 8065 (a) is 28% heavier (535 kg / 1,179 lb) than the Lamborghini R-603 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the R-603 (DT) and the 8065 (a).
Which has the wider choice of gears?12Traktorenlexikon, “Lamborghini R 603 DT”8 to 16Traktorenlexikon, “Steyr 8065”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the R-603 (DT) and the 8065 (a).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini R 603 DT”25 km/h (15.5 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8065”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Lamborghini R 603 DT”540 rpm / 1000 rpmTraktorenlexikon, “Steyr 8065”AheadThe Steyr 8065 (a) offers 1000 rpm at the PTO, which the Lamborghini R-603 (DT) does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the R-603 (DT) and the 8065 (a).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini R 603 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 8065”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1973–19821986–1992Ahead (a fact, not an advantage)The Steyr 8065 (a) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 8065 (a) is 28% heavier (535 kg / 1,179 lb) than the Lamborghini R-603 (DT) (both unladen weight, as stated by the source).
  • The Steyr 8065 (a) offers 1000 rpm at the PTO, which the Lamborghini R-603 (DT) does not (as stated by the sources).
  • The Steyr 8065 (a) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the R-603 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8065 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources