Lamborghini R-503 (DT) vs Steyr 8060 (a)

13 material differences

Tractor one

1973–1982

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the R-503 (DT) and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Lamborghini R-503 (DT) and Steyr 8060 (a), field by field
Field	R-503 (DT)	8060 (a)	Gap
Engine
Engine power, claimed claimed	46.5 hp	47.3 hp	—
Engine declared	LAMBORGHINI FL-1003/1	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	2.83 L	2.59 L	+9% R-503 (DT)
Maximum torque declared	118 lb·ft · 160 N·m	—	—
Transmission
Top speed declared	14.3 mph · 23 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry LuK double clutch type 11 inches	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	—	6.4 gpm · 24.1 L/min	—
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	5,622 lb · 2,550 kg	4,850 lb · 2,200 kg	+16% R-503 (DT)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,836 lb · 1,740 kg	5,335 lb · 2,420 kg	+39% 8060 (a)
Wheelbase declared	75.6 in · 1,920 mm	80.1 in · 2,035 mm	+6% 8060 (a)
Length declared	126.4 in · 3,210 mm	137.6 in · 3,495 mm	+9% 8060 (a)
Width declared	63.0 in · 1,600 mm	67.3 in · 1,710 mm	+7% 8060 (a)
Height declared	58.7 in · 1,490 mm	92.9 in · 2,360 mm	+58% 8060 (a)
Ground clearance declared	16.1 in · 410 mm	14.2 in · 360 mm	+14% R-503 (DT)
Turning radius, braked declared	—	10.6 ft · 3.24 m	—
Fuel tank declared	63.4 qt · 60.0 L	101.4 qt · 96.0 L	+60% 8060 (a)

Source

Source