Lamborghini R-480 (DT) or Landini R-8500 (DT) "TL 23 N/A"?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R-480 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini R-8500 (DT) "TL 23 N/A" suits loader and hydraulic implement work better on this data: 10% (2.5 L/min / 0.7 gpm) more hydraulic flow.
  • The Landini R-8500 (DT) "TL 23 N/A" suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R-480 (DT) and Landini R-8500 (DT) "TL 23 N/A", with the call on each
QuestionR-480 (DT)R-8500 (DT) "TL 23 N/A"Call
Which puts more power through the PTO shaft?58.8 kW (78.9 hp)Traktorenlexikon, “Lamborghini R 480 (DT)”58.8 kW (78.9 hp)Traktorenlexikon, “Landini 8500”Not comparableNot comparable on power at the PTO shaft: the R-480 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the R-480 (DT) and the R-8500 (DT) "TL 23 N/A".
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the R-480 (DT) and the R-8500 (DT) "TL 23 N/A".
Which pumps more oil for implements?24.2 L/min (6.4 gpm)Traktorenlexikon, “Lamborghini R 480 (DT)”26.7 L/min (7.1 gpm)Traktorenlexikon, “Landini 8500”AheadThe Landini R-8500 (DT) "TL 23 N/A" has 10% more hydraulic flow (2.5 L/min / 0.7 gpm) than the Lamborghini R-480 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,130 kg (4,696 lb)Traktorenlexikon, “Landini 8500”No figureNo call on three-point lift: no figure on record for the R-480 (DT).
Which is heavier, for traction?3,050 kg (6,724 lb)Traktorenlexikon, “Lamborghini R 480 (DT)”2,610 kg (5,754 lb)Traktorenlexikon, “Landini 8500”Ahead (a fact, not an advantage)The Lamborghini R-480 (DT) is 17% heavier (440 kg / 970 lb) than the Landini R-8500 (DT) "TL 23 N/A" (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the R-480 (DT) and the R-8500 (DT) "TL 23 N/A".
Which has the wider choice of gears?12Traktorenlexikon, “Lamborghini R 480 (DT)”12Traktorenlexikon, “Landini 8500”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the R-480 (DT) and the R-8500 (DT) "TL 23 N/A".
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini R 480 (DT)”30 km/h (18.6 mph)Traktorenlexikon, “Landini 8500”AheadThe Landini R-8500 (DT) "TL 23 N/A" has 20% more top speed (5.0 km/h / 3.1 mph) than the Lamborghini R-480 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Lamborghini R 480 (DT)”540/1000 rpmTraktorenlexikon, “Landini 8500”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini R 480 (DT)”No figureNo call on PTO independence: not stated for the R-8500 (DT) "TL 23 N/A".
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini R 480 (DT)”2WD / 4WDTraktorenlexikon, “Landini 8500”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1969–19721973–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini R-8500 (DT) "TL 23 N/A" has 10% more hydraulic flow (2.5 L/min / 0.7 gpm) than the Lamborghini R-480 (DT) (both pump flow, as stated by the source).
  • The Lamborghini R-480 (DT) is 17% heavier (440 kg / 970 lb) than the Landini R-8500 (DT) "TL 23 N/A" (both unladen weight, as stated by the source).
  • The Landini R-8500 (DT) "TL 23 N/A" has 20% more top speed (5.0 km/h / 3.1 mph) than the Lamborghini R-480 (DT) (both top speed forward, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the R-480 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-8500 (DT) "TL 23 N/A" has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources