9 material differences · fewer than 12

Tractor oneLamborghini R-475 (DT)1971–1973No measured PTO figureTractor twoURSUS C-385 (Ursus)1969–1983No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (29%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 5 fields identical or within 5%, which is not counted as material

Lamborghini R-475 (DT) and URSUS C-385 (Ursus), field by field
FieldR-475 (DT)C-385Gap
Engine
Engine power, claimed claimed73.0 hp75.0 hp—
Engine declaredLAMBORGHINI FL-1104T.S.-MARTIN Z-8001 or Z-7501differs
Displacement declared4.16 L4.56 L+10% C-385
Maximum torque declared190 lb·ft · 258 N·m185 lb·ft · 251 N·m—
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredPedal operated dry Walterscheid double clutchPedal-operated dry ZBROJOVKA-BRNO single-plate clutch type 13" 325 mm disc diameterdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared6.4 gpm · 24.2 L/min8.5 gpm · 32.0 L/min+32% C-385
Pressure declared—2,277 psi · 157 bar—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared6,045 lb · 2,742 kg7,771 lb · 3,525 kg+29% C-385
Wheelbase declared89.0 in · 2,260 mm93.9 in · 2,385 mm+6% C-385
Length declared149.2 in · 3,790 mm155.3 in · 3,945 mm—
Width declared66.1–93.7 in · 1,680–2,380 mm76.0 in · 1,930 mmdiffers
Ground clearance declared—13.8 in · 350 mm—
Turning radius, braked declared11.8 ft · 3.60 m9.9 ft · 3.03 m+19% R-475 (DT)
Fuel tank declared68.7 qt · 65.0 L95.1 qt · 90.0 L+38% C-385

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lamborghini R-475 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini R 475 (DT)”
  • Source: Traktorenlexikon, “Lamborghini R 470 (DT)”

URSUS C-385 (Ursus) sources

Source
  • Source: Traktorenlexikon, “Ursus C-385”
  • Source: Traktorenlexikon, “Ursus C-385A”