Lamborghini R-470 (DT) or Steyr 8080 (a)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R-470 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R-470 (DT) and Steyr 8080 (a), with the call on each
QuestionR-470 (DT)8080 (a)Call
Which puts more power through the PTO shaft?51.5 kW (69.1 hp)Traktorenlexikon, “Lamborghini R 470 (DT)”51.5 kW (69.1 hp)Traktorenlexikon, “Steyr 8080”Not comparableNot comparable on power at the PTO shaft: the R-470 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the R-470 (DT) and the 8080 (a).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the R-470 (DT) and the 8080 (a).
Which pumps more oil for implements?24.2 L/min (6.4 gpm)Traktorenlexikon, “Lamborghini R 470 (DT)”No figureNo call on hydraulic flow: no figure on record for the 8080 (a).
Which lifts more on the three-point hitch?2,580 kg (5,688 lb)Traktorenlexikon, “Lamborghini R 470 (DT)”2,600 kg (5,732 lb)Traktorenlexikon, “Steyr 8080”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?2,650 kg (5,842 lb)Traktorenlexikon, “Lamborghini R 470 (DT)”2,808 kg (6,191 lb)Traktorenlexikon, “Steyr 8080”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the R-470 (DT) and the 8080 (a).
Which has the wider choice of gears?12Traktorenlexikon, “Lamborghini R 470 (DT)”16 to 32Traktorenlexikon, “Steyr 8080”AheadThe Steyr 8080 (a) has 33% more forward gears (4 gears) than the Lamborghini R-470 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the R-470 (DT) and the 8080 (a).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini R 470 (DT)”25 km/h (15.5 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8080”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Lamborghini R 470 (DT)”540/1000 rpmTraktorenlexikon, “Steyr 8080”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini R 470 (DT)”independentTraktorenlexikon, “Steyr 8080”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini R 470 (DT)”2WD / 4WDTraktorenlexikon, “Steyr 8080”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1969–19721979–1992Ahead (a fact, not an advantage)The Steyr 8080 (a) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 8080 (a) has 33% more forward gears (4 gears) than the Lamborghini R-470 (DT) (both forward gears, as stated by the source).
  • The Steyr 8080 (a) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the R-470 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8080 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources