3 material differences · fewer than 12
Tractor oneLamborghini R-240 (DT)1970–1973No measured PTO figureTractor twoSOMECA SOM-411/B1964–1965No measured PTO figure
Which should you choose?
Read our verdict on the R-240 (DT) and the SOM-411/B → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | R-240 (DT) | SOM-411/B | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 38.5 hp | 38.5 hp | — |
| Engine declared | LAMBORGHINI FL-1002 | SIMCA-FIAT 105.615 | differs |
| Displacement declared | 1.89 L | 1.90 L | — |
| Maximum torque declared | — | 86 lb·ft · 116 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | — | Pedal operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.4 gpm · 16.7 L/min | 4.4 gpm · 16.5 L/min | — |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,748 lb · 1,700 kg | 2,932 lb · 1,330 kg | +28% R-240 (DT) |
| Wheelbase declared | 70.5 in · 1,790 mm | 70.3 in · 1,785 mm | — |
| Length declared | 112.6 in · 2,860 mm | 114.0 in · 2,895 mm | — |
| Width declared | 65.0 in · 1,650 mm | 65.0–96.5 in · 1,650–2,450 mm | differs |
| Ground clearance declared | 16.5 in · 420 mm | 15.9 in · 405 mm | — |
| Turning radius, braked declared | — | 10.2 ft · 3.10 m | — |
| Fuel tank declared | — | 41.2 qt · 39.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-240 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 240 (DT)”
SOMECA SOM-411/B sources
- Source: Traktorenlexikon, “Someca SOM 411/B”