5 material differences · fewer than 12

Tractor oneLamborghini R-240 (DT)1970–1973No measured PTO figureTractor twoOLIVER 1250 (4 WD)1965–1969No measured PTO figure

Which should you choose?

Read our verdict on the R-240 (DT) and the 1250 (4 WD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini R-240 (DT) and OLIVER 1250 (4 WD), field by field
FieldR-240 (DT)1250 (4 WD)Gap
Engine
Engine power, claimed claimed38.5 hp38.0 hp—
Engine declaredLAMBORGHINI FL-1002FIAT 615differs
Displacement declared1.89 L——
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declared—Pedal-operated dry double clutch—
Hydraulics & hitch
Pump flow declared4.4 gpm · 16.7 L/min——
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,748 lb · 1,700 kg3,285 lb · 1,490 kg+14% R-240 (DT)
Wheelbase declared70.5 in · 1,790 mm75.5 in · 1,918 mm+7% 1250 (4 WD)
Length declared112.6 in · 2,860 mm118.0 in · 2,997 mm—
Width declared65.0 in · 1,650 mm50.5 in · 1,283 mm+29% R-240 (DT)
Ground clearance declared16.5 in · 420 mm15.4 in · 390 mm+8% R-240 (DT)
Turning radius, braked declared—9.8 ft · 3.00 m—
Fuel tank declared—52.8 qt · 50.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lamborghini R-240 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini R 240 (DT)”

OLIVER 1250 (4 WD) sources

Source
  • Source: Traktorenlexikon, “Oliver 1250”