Lamborghini R.1306 DT vs VALMET 8200

11 material differences · fewer than 12

Tractor one

from 2004

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the R.1306 DT and the 8200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini R.1306 DT and VALMET 8200, field by field
Field	R.1306 DT	8200	Gap
Engine
Engine power, claimed claimed	128.2 hp	128.2 hp	—
Engine declared	SAME 1000.6 WTI 11 (Tier-II)	VALMET 634 D	differs
Displacement declared	6.00 L	7.37 L	+23% 8200
Maximum torque declared	330 lb·ft · 448 N·m	361 lb·ft · 490 N·m	+9% 8200
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated, dry Fichtel & Sachs single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	17.5 gpm · 66.2 L/min	17.8 gpm · 67.4 L/min	—
Pressure declared	3,118 psi · 215 bar	2,901 psi · 200 bar	+8% R.1306 DT
Three-point lift at ends declared	11,905 lb · 5,400 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,181 lb · 5,525 kg	10,362 lb · 4,700 kg	+18% R.1306 DT
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% R.1306 DT
Length declared	175.2 in · 4,450 mm	186.8 in · 4,745 mm	+7% 8200
Width declared	92.9 in · 2,360 mm	86.6 in · 2,200 mm	+7% R.1306 DT
Height declared	111.0 in · 2,820 mm	108.7 in · 2,760 mm	—
Ground clearance declared	21.7 in · 550 mm	18.7 in · 475 mm	+16% R.1306 DT
Turning radius, braked declared	—	15.5 ft · 4.71 m	—
Fuel tank declared	253.6 qt · 240.0 L	174.4 qt · 165.0 L	+45% R.1306 DT

Source

Source