11 material differences · fewer than 12
Tractor oneLamborghini 1100 DT2000–2003No measured PTO figureTractor twoVALMET Mega 8050 HiTech1998–2004No measured PTO figure
Which should you choose?
Read our verdict on the 1100 DT and the Mega 8050 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 1100 DT | Mega 8050 HiTech | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.5 hp | 108.5 hp | — |
| Engine declared | SAME 1000.6 WT | VALMET 620 DSRE | differs |
| Displacement declared | 6.00 L | 6.59 L | +10% Mega 8050 HiTech |
| Maximum torque declared | 299 lb·ft · 405 N·m | 340 lb·ft · 461 N·m | +14% Mega 8050 HiTech |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal-operated, hydraulic dry S.L.H. single-disc clutch | Pedal-operated dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 18.8 gpm · 71.0 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,861 lb · 5,380 kg | 10,450 lb · 4,740 kg | +14% 1100 DT |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 108.3 in · 2,750 mm | 100.7 in · 2,558 mm | +8% 1100 DT |
| Length declared | 180.7 in · 4,590 mm | 187.3 in · 4,757 mm | — |
| Width declared | 88.6 in · 2,250 mm | 84.8–104.7 in · 2,155–2,660 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 18.7 in · 475 mm | +19% Mega 8050 HiTech |
| Turning radius, braked declared | 12.0 ft · 3.65 m | — | — |
| Fuel tank declared | 253.6 qt · 240.0 L | 174.4 qt · 165.0 L | +45% 1100 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini 1100 DT sources
- Source: Traktorenlexikon, “Lamborghini Premium 1100 DT A”
- Source: Traktorenlexikon, “Lamborghini 135 DT A Formula”
VALMET Mega 8050 HiTech sources
- Source: Traktorenlexikon, “Valmet Mega-8050 HiTech”
- Source: Traktorenlexikon, “Valmet Mega-8150 HiTech”