Lamborghini 1060 DT or New Holland T 5060?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland T 5060: hydraulic flow and three-point lift.
- The New Holland T 5060 suits loader and hydraulic implement work better on this data: 64% (26.1 L/min / 6.9 gpm) more hydraulic flow and 22% (1,040 kg / 2,293 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1060 DT | T 5060 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 70.7 kW (94.8 hp)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 69.9 kW (93.7 hp)Traktorenlexikon, “New Holland T5060” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1060 DT and the T 5060. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1060 DT and the T 5060. |
| Which pumps more oil for implements? | 41.0 L/min (10.8 gpm)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 67.1 L/min (17.7 gpm)Traktorenlexikon, “New Holland T5060” | AheadThe New Holland T 5060 has 64% more hydraulic flow (26.1 L/min / 6.9 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,700 kg (10,362 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 5,740 kg (12,655 lb)Traktorenlexikon, “New Holland T5060” | AheadThe New Holland T 5060 has 22% more lift (1,040 kg / 2,293 lb) than the Lamborghini 1060 DT (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,720 kg (10,406 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 3,835 kg (8,455 lb)Traktorenlexikon, “New Holland T5060” | Ahead (a fact, not an advantage)The Lamborghini 1060 DT is 23% heavier (885 kg / 1,951 lb) than the New Holland T 5060 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,000 kg (15,432 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 6,800 kg (14,991 lb)Traktorenlexikon, “New Holland T5060” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 20 to 60Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 12 to 24Traktorenlexikon, “New Holland T5060” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1060 DT and the T 5060. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland T5060” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini Premium 1060 DT A” | 540/540E/1000 rpmTraktorenlexikon, “New Holland T5060” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T5060” | No figureNo call on PTO independence: not stated for the 1060 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini Premium 1060 DT A” | 2WD / 4WDTraktorenlexikon, “New Holland T5060” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 2008–2012 | Ahead (a fact, not an advantage)The New Holland T 5060 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland T 5060 has 64% more hydraulic flow (26.1 L/min / 6.9 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source).
- The New Holland T 5060 has 22% more lift (1,040 kg / 2,293 lb) than the Lamborghini 1060 DT (both lift at the hitch ends, as stated by the source).
- The Lamborghini 1060 DT is 23% heavier (885 kg / 1,951 lb) than the New Holland T 5060 (both unladen weight, as stated by the source).
- The New Holland T 5060 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources