Lamborghini 1060 DT or Massey Ferguson MF 4365 (A)?
Which should you choose?
The figures split: the Massey Ferguson MF 4365 (A) is ahead on hydraulic flow and maximum permissible mass; the Lamborghini 1060 DT is ahead on three-point lift and forward gears.
- The Massey Ferguson MF 4365 (A) suits road haulage better on this data: 12% (870 kg / 1,918 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1060 DT | MF 4365 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 70.7 kW (94.8 hp)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 70.5 kW (94.5 hp)Traktorenlexikon, “Massey Ferguson MF 4365” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1060 DT and the MF 4365 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1060 DT and the MF 4365 (A). |
| Which pumps more oil for implements? | 41.0 L/min (10.8 gpm)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 59.9 L/min (15.8 gpm)Traktorenlexikon, “Massey Ferguson MF 4365” | AheadThe Massey Ferguson MF 4365 (A) has 46% more hydraulic flow (18.9 L/min / 5.0 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,700 kg (10,362 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 4,000 kg (8,818 lb)Traktorenlexikon, “Massey Ferguson MF 4365” | AheadThe Lamborghini 1060 DT has 18% more lift (700 kg / 1,543 lb) than the Massey Ferguson MF 4365 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,720 kg (10,406 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 3,529 kg (7,780 lb)Traktorenlexikon, “Massey Ferguson MF 4365” | Ahead (a fact, not an advantage)The Lamborghini 1060 DT is 34% heavier (1,191 kg / 2,626 lb) than the Massey Ferguson MF 4365 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,000 kg (15,432 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 7,870 kg (17,350 lb)Traktorenlexikon, “Massey Ferguson MF 4365” | AheadThe Massey Ferguson MF 4365 (A) has 12% higher maximum permissible mass (870 kg / 1,918 lb) than the Lamborghini 1060 DT (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 20 to 60Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 12Traktorenlexikon, “Massey Ferguson MF 4365” | AheadThe Lamborghini 1060 DT has 67% more forward gears (8 gears) than the Massey Ferguson MF 4365 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1060 DT and the MF 4365 (A). |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 4365” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini Premium 1060 DT A” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 4365” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 4365” | No figureNo call on PTO independence: not stated for the 1060 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini Premium 1060 DT A” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4365” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 2002–2003 | Ahead (a fact, not an advantage)The Massey Ferguson MF 4365 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 4365 (A) has 46% more hydraulic flow (18.9 L/min / 5.0 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source).
- The Lamborghini 1060 DT has 18% more lift (700 kg / 1,543 lb) than the Massey Ferguson MF 4365 (A) (both lift at the hitch ends, as stated by the source).
- The Lamborghini 1060 DT is 34% heavier (1,191 kg / 2,626 lb) than the Massey Ferguson MF 4365 (A) (both unladen weight, as stated by the source).
- The Massey Ferguson MF 4365 (A) has 12% higher maximum permissible mass (870 kg / 1,918 lb) than the Lamborghini 1060 DT (both maximum permissible mass, as stated by the source).
- The Lamborghini 1060 DT has 67% more forward gears (8 gears) than the Massey Ferguson MF 4365 (A) (both forward gears, as stated by the source).
- The Massey Ferguson MF 4365 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources