Lamborghini Premium 1050 DT or VALMET 905-4?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 905-4: three-point lift. On features, the Lamborghini Premium 1050 DT is ahead on top speed.
- The VALMET 905-4 suits loader and hydraulic implement work better on this data: 16% (590 kg / 1,301 lb) more three-point lift.
- The Lamborghini Premium 1050 DT suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Premium 1050 DT | 905-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 72.5 kW (97.2 hp)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 71.8 kW (96.3 hp)Traktorenlexikon, “Valmet 905” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Premium 1050 DT and the 905-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Premium 1050 DT and the 905-4. |
| Which pumps more oil for implements? | 51.4 L/min (13.6 gpm)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 47.5 L/min (12.5 gpm)Traktorenlexikon, “Valmet 905” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,600 kg (7,937 lb)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 4,190 kg (9,237 lb)Traktorenlexikon, “Valmet 905” | AheadThe VALMET 905-4 has 16% more lift (590 kg / 1,301 lb) than the Lamborghini Premium 1050 DT (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,370 kg (9,634 lb)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 4,130 kg (9,105 lb)Traktorenlexikon, “Valmet 905” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | — | No figureNo call on maximum permissible mass: no figure on record for the 905-4. |
| Which has the wider choice of gears? | 20 to 60Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 14 to 16Traktorenlexikon, “Valmet 905” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Premium 1050 DT and the 905-4. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Premium 1050 DT A” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 905” | AheadThe Lamborghini Premium 1050 DT has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 905-4 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini Premium 1050 DT A” | 540/1000 rpmTraktorenlexikon, “Valmet 905” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 905” | No figureNo call on PTO independence: not stated for the Premium 1050 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini Premium 1050 DT A” | 4WDTraktorenlexikon, “Valmet 905” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1992–2005 | 1984–1989 | Ahead (a fact, not an advantage)The Lamborghini Premium 1050 DT is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 905-4 has 16% more lift (590 kg / 1,301 lb) than the Lamborghini Premium 1050 DT (both lift at the hitch ends, as stated by the source).
- The Lamborghini Premium 1050 DT has 33% more top speed (10.0 km/h / 6.2 mph) than the VALMET 905-4 (both top speed forward, as stated by the source).
- The Lamborghini Premium 1050 DT is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources