11 material differences · fewer than 12
Tractor oneLamborghini 350 DT1992–2003No measured PTO figureTractor twoUTB U-3601977–1991No measured PTO figure
Which should you choose?
Read our verdict on the 350 DT and the U-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 350 DT | U-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.5 hp | 34.5 hp | — |
| Engine declared | MITSUBISHI K4 F-D | UTB D-115.000 | differs |
| Displacement declared | 1.49 L | 2.40 L | +61% U-360 |
| Maximum torque declared | — | 97 lb·ft · 132 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.3 mph · 23 km/h | +9% 350 DT |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 5.8 gpm · 21.8 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,447–2,601 lb · 1,110–1,180 kg | 3,799 lb · 1,723 kg | differs |
| Maximum permissible mass declared | 5,291 lb · 2,400 kg | — | — |
| Wheelbase declared | 64.2 in · 1,630 mm | 75.5 in · 1,918 mm | +18% U-360 |
| Length declared | 105.9 in · 2,690 mm | 113.0 in · 2,870 mm | +7% U-360 |
| Width declared | 40.2–53.5 in · 1,020–1,360 mm | 65.9 in · 1,674 mm | differs |
| Ground clearance declared | 13.6 in · 345 mm | 18.0 in · 457 mm | +32% U-360 |
| Turning radius, braked declared | 9.0 ft · 2.73 m | 9.7 ft · 2.95 m | +8% U-360 |
| Fuel tank declared | 30.6 qt · 29.0 L | 56.0 qt · 53.0 L | +83% U-360 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini 350 DT sources
- Source: Traktorenlexikon, “Lamborghini Runner 350 DT A”
- Source: Traktorenlexikon, “Hürlimann Prince 435”
UTB U-360 sources
- Source: Traktorenlexikon, “UTB U 360”
- Source: Traktorenlexikon, “UTB U 453 DT”