Lamborghini 350 DT vs UTB U-340 (DTC)

10 material differences · fewer than 12

Tractor one

1992–2003

No measured PTO figure

Tractor two

1987–1991

No measured PTO figure

Which should you choose?

Read our verdict on the 350 DT and the U-340 (DTC) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini 350 DT and UTB U-340 (DTC), field by field
Field	350 DT	U-340 (DTC)	Gap
Engine
Engine power, claimed claimed	34.5 hp	34 hp	—
Engine declared	MITSUBISHI K4 F-D	UTB D-111.050	differs
Displacement declared	1.49 L	1.80 L	+21% U-340 (DTC)
Maximum torque declared	—	97 lb·ft · 132 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	14.9 mph · 24 km/h	—
Clutch declared	—	Dry double clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	5.8 gpm · 21.8 L/min	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,447–2,601 lb · 1,110–1,180 kg	3,450 lb · 1,565 kg	differs
Maximum permissible mass declared	5,291 lb · 2,400 kg	—	—
Wheelbase declared	64.2 in · 1,630 mm	71.1 in · 1,805 mm	+11% U-340 (DTC)
Length declared	105.9 in · 2,690 mm	110.4 in · 2,805 mm	—
Width declared	40.2 in · 1,020 mm	62.4 in · 1,585 mm	+55% U-340 (DTC)
Height declared	78.3 in · 1,990 mm	58.7 in · 1,491 mm	+33% 350 DT
Ground clearance declared	13.6 in · 345 mm	18.3 in · 465 mm	+35% U-340 (DTC)
Turning radius, braked declared	9.0 ft · 2.73 m	10.0 ft · 3.06 m	+12% U-340 (DTC)
Fuel tank declared	30.6 qt · 29.0 L	57.1 qt · 54.0 L	+86% U-340 (DTC)

Source

Source