Lamborghini 350 DT vs SAME 35 DT

3 material differences · fewer than 12

Tractor one

1992–2003

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 350 DT and the 35 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

3 material differences · 13 fields identical or within 5%, which is not counted as material

Lamborghini 350 DT and SAME 35 DT, field by field
Field	350 DT	35 DT	Gap
Engine
Engine power, claimed claimed	34.5 hp	34.5 hp	—
Engine declared	MITSUBISHI K4 F-D	MITSUBISHI K4 F-D	—
Displacement declared	1.49 L	1.49 L	—
Maximum torque declared	—	63 lb·ft · 84.9 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal operated dry single-plate clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	—	7.9 gpm · 30.0 L/min	—
Pressure declared	—	1,305 psi · 90 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	2,646 lb · 1,200 kg	+30% 350 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	2,447–2,601 lb · 1,110–1,180 kg	2,513 lb · 1,140 kg	—
Maximum permissible mass declared	5,291 lb · 2,400 kg	5,291 lb · 2,400 kg	—
Wheelbase declared	64.2 in · 1,630 mm	64.2 in · 1,630 mm	—
Length declared	105.9 in · 2,690 mm	116.5 in · 2,960 mm	+10% 35 DT
Width declared	40.2 in · 1,020 mm	48.8 in · 1,240 mm	+22% 35 DT
Height declared	78.3 in · 1,990 mm	80.1 in · 2,035 mm	—
Ground clearance declared	13.6 in · 345 mm	13.6 in · 345 mm	—
Turning radius, braked declared	9.0 ft · 2.73 m	8.9 ft · 2.71 m	—
Fuel tank declared	30.6 qt · 29.0 L	30.6 qt · 29.0 L	—

Source

Source