Lamborghini 950 DT vs ZETOR 10641

12 material differences

Tractor one

1995–2004

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 950 DT and the 10641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Lamborghini 950 DT and ZETOR 10641, field by field
Field	950 DT	10641	Gap
Engine
Engine power, claimed claimed	93.6 hp	103.5 hp	+11% 10641
Engine declared	SAME H-1000.4 WT-2	ZETOR Z-1303	differs
Displacement declared	4.00 L	4.16 L	—
Maximum torque declared	243 lb·ft · 329 N·m	286 lb·ft · 388 N·m	+18% 10641
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. single-plate clutch	Pedal-operated dry Zetor single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	16.1 gpm · 61.0 L/min	17.4 gpm · 66.0 L/min	+8% 10641
Pressure declared	3,046 psi · 210 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	7,937 lb · 3,600 kg	12,747 lb · 5,782 kg	+61% 10641
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	8,984 lb · 4,075 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,771 lb · 6,700 kg	+12% 10641
Wheelbase declared	93.4 in · 2,373 mm	94.0 in · 2,388 mm	—
Length declared	149.0 in · 3,785 mm	172.4 in · 4,380 mm	+16% 10641
Width declared	72.4 in · 1,840 mm	85.2 in · 2,165 mm	+18% 10641
Height declared	106.1 in · 2,695 mm	106.9 in · 2,715 mm	—
Ground clearance declared	17.5 in · 445 mm	15.2 in · 386 mm	+15% 950 DT
Turning radius, braked declared	13.4 ft · 4.07 m	—	—
Fuel tank declared	158.5 qt · 150.0 L	190.2 qt · 180.0 L	+20% 10641

Source

Source