11 material differences · fewer than 12
Tractor oneLamborghini 950 DT1995–2004No measured PTO figureTractor twoNew Holland 7635 (A)1996–1998No measured PTO figure
Which should you choose?
Read our verdict on the 950 DT and the 7635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 950 DT | 7635 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.6 hp | 93.7 hp | — |
| Engine declared | SAME H-1000.4 WT-2 | Iveco 8045.25 K | differs |
| Displacement declared | 4.00 L | 3.91 L | — |
| Maximum torque declared | 243 lb·ft · 329 N·m | 209 lb·ft · 284 N·m | +16% 950 DT |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry S.L.H. single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 16.1 gpm · 61.0 L/min | 15.9 gpm · 60.0 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 2,103–2,466 psi · 145–170 bar | differs |
| Three-point lift, at the coupling points declared | 7,937 lb · 3,600 kg | 9,259 lb · 4,200 kg | +17% 7635 (A) |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,436 lb · 4,280 kg | 7,496 lb · 3,400 kg | +26% 950 DT |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | 13,228 lb · 6,000 kg | — |
| Wheelbase declared | 93.4 in · 2,373 mm | 92.2 in · 2,342 mm | — |
| Length declared | 149.0 in · 3,785 mm | 157.5 in · 4,000 mm | +6% 7635 (A) |
| Width declared | 72.4–101.6 in · 1,840–2,580 mm | 79.5–105.7 in · 2,020–2,685 mm | differs |
| Ground clearance declared | 17.5 in · 445 mm | 19.7 in · 500 mm | +12% 7635 (A) |
| Turning radius, braked declared | 13.4 ft · 4.07 m | 13.9 ft · 4.25 m | — |
| Fuel tank declared | 158.5 qt · 150.0 L | 121.5 qt · 115.0 L | +30% 950 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini 950 DT sources
- Source: Traktorenlexikon, “Lamborghini Premium 950 DT A”
New Holland 7635 (A) sources
- Source: Traktorenlexikon, “New Holland 7635”