Lamborghini R-956 (DT) vs VALMET 705/705-4

11 material differences · fewer than 12

Tractor one

1983–1996

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the R-956 (DT) and the 705/705-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini R-956 (DT) and VALMET 705/705-4, field by field
Field	R-956 (DT)	705/705-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	82 hp	+15% R-956 (DT)
Engine declared	SAME 916.6 W	VALMET TD 44 DS 7	differs
Displacement declared	5.50 L	4.40 L	+25% R-956 (DT)
Maximum torque declared	245 lb·ft · 332 N·m	235 lb·ft · 318 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry LAMBORGHINI single-disc clutch	Pedal-operated, dry LuK single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.6 gpm · 63.0 L/min	12.7 gpm · 48.0 L/min	+31% R-956 (DT)
Pressure declared	3,046 psi · 210 bar	3,191 psi · 220 bar	—
Three-point lift at ends declared	10,141 lb · 4,600 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,466 lb · 3,840 kg	8,356 lb · 3,790 kg	—
Wheelbase declared	103.0 in · 2,617 mm	93.9 in · 2,385 mm	+10% R-956 (DT)
Length declared	151.0 in · 3,836 mm	177.8 in · 4,515 mm	+18% 705/705-4
Width declared	77.0 in · 1,957 mm	83.9 in · 2,130 mm	+9% 705/705-4
Height declared	104.4 in · 2,652 mm	105.1 in · 2,670 mm	—
Ground clearance declared	20.9 in · 532 mm	18.8 in · 478 mm	+11% R-956 (DT)
Fuel tank declared	137.4 qt · 130.0 L	190.2 qt · 180.0 L	+38% 705/705-4

Source

Source