6 material differences · fewer than 12
Tractor oneLamborghini R-956 (DT)1983–1996No measured PTO figureTractor twoMassey Ferguson MF 6991984–1986No measured PTO figure
Which should you choose?
Read our verdict on the R-956 (DT) and the MF 699 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | R-956 (DT) | MF 699 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 94 hp | — |
| Engine declared | SAME 916.6 W | Perkins A 6.354 | differs |
| Displacement declared | 5.50 L | 5.80 L | +5% MF 699 |
| Maximum torque declared | 245 lb·ft · 332 N·m | 255 lb·ft · 346 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 19.9 mph · 32 km/h | differs |
| Clutch declared | Pedal-operated dry LAMBORGHINI single-disc clutch | Dry disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 16.6 gpm · 63.0 L/min | 16.8 gpm · 63.5 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,466 lb · 3,840 kg | 8,984 lb · 4,075 kg | +6% MF 699 |
| Wheelbase declared | 103.0 in · 2,617 mm | 101.6 in · 2,580 mm | — |
| Length declared | 151.0 in · 3,836 mm | 166.9 in · 4,240 mm | +11% MF 699 |
| Width declared | 77.0–100.7 in · 1,957–2,557 mm | — | — |
| Ground clearance declared | 20.9 in · 532 mm | — | — |
| Fuel tank declared | 137.4 qt · 130.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-956 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 956 DT”
Massey Ferguson MF 699 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 699”