Lamborghini R 874-90 (DT) vs New Holland TL 100 (A)

9 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the R 874-90 (DT) and the TL 100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Lamborghini R 874-90 (DT) and New Holland TL 100 (A), field by field
Field	R 874-90 (DT)	TL 100 (A)	Gap
Engine
Engine power, claimed claimed	86.8 hp	93.7 hp	+8% TL 100 (A)
Engine declared	SAME 1000.4 WT	Iveco 8045.25 K	differs
Displacement declared	4.00 L	3.91 L	—
Maximum torque declared	225 lb·ft · 305 N·m	245 lb·ft · 332 N·m	+9% TL 100 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	10.4 gpm · 39.5 L/min	15.9 gpm · 60.0 L/min	+52% TL 100 (A)
Pressure declared	1,740 psi · 120 bar	—	—
Three-point lift at ends declared	6,349 lb · 2,880 kg	8,554 lb · 3,880 kg	+35% TL 100 (A)
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,856 lb · 3,110 kg	8,300 lb · 3,765 kg	+21% TL 100 (A)
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	94.9 in · 2,410 mm	92.2 in · 2,342 mm	—
Length declared	144.5 in · 3,670 mm	174.4 in · 4,430 mm	+21% TL 100 (A)
Width declared	81.1 in · 2,060 mm	79.1 in · 2,009 mm	—
Height declared	102.2 in · 2,595 mm	100.4 in · 2,550 mm	—
Ground clearance declared	20.5 in · 520 mm	17.3 in · 440 mm	+18% R 874-90 (DT)
Turning radius, braked declared	9.6 ft · 2.94 m	12.0 ft · 3.65 m	+24% TL 100 (A)
Fuel tank declared	116.2 qt · 110.0 L	121.5 qt · 115.0 L	—

Source

Source