Lamborghini R 774-80 (DT) or VALMET 655/655-4?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R 774-80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 655/655-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VALMET 655/655-4 suits loader and hydraulic implement work better on this data: 66% (1,795 kg / 3,957 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R 774-80 (DT) and VALMET 655/655-4, with the call on each
QuestionR 774-80 (DT)655/655-4Call
Which puts more power through the PTO shaft?58.8 kW (78.9 hp)Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”58.8 kW (78.9 hp)Traktorenlexikon, “Valmet 655”Not comparableNot comparable on power at the PTO shaft: the R 774-80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 655/655-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the R 774-80 (DT) and the 655/655-4.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the R 774-80 (DT) and the 655/655-4.
Which pumps more oil for implements?35.8 L/min (9.5 gpm)Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”No figureNo call on hydraulic flow: no figure on record for the 655/655-4.
Which lifts more on the three-point hitch?2,705 kg (5,964 lb)Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”4,500 kg (9,921 lb)Traktorenlexikon, “Valmet 655”AheadThe VALMET 655/655-4 has 66% more lift (1,795 kg / 3,957 lb) than the Lamborghini R 774-80 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,080 kg (6,790 lb)Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”3,760 kg (8,289 lb)Traktorenlexikon, “Valmet 655”Ahead (a fact, not an advantage)The VALMET 655/655-4 is 22% heavier (680 kg / 1,499 lb) than the Lamborghini R 774-80 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the R 774-80 (DT) and the 655/655-4.
Which has the wider choice of gears?15 to 20Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”8 to 16Traktorenlexikon, “Valmet 655”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the R 774-80 (DT) and the 655/655-4.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”30 km/h (18.6 mph)Traktorenlexikon, “Valmet 655”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”540 rpmTraktorenlexikon, “Valmet 655”AheadThe Lamborghini R 774-80 (DT) offers 1000 rpm at the PTO, which the VALMET 655/655-4 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”independentTraktorenlexikon, “Valmet 655”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”2WD / 4WDTraktorenlexikon, “Valmet 655”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19981988–1989EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 655/655-4 has 66% more lift (1,795 kg / 3,957 lb) than the Lamborghini R 774-80 (DT) (both lift at the hitch ends, as stated by the source).
  • The VALMET 655/655-4 is 22% heavier (680 kg / 1,499 lb) than the Lamborghini R 774-80 (DT) (both unladen weight, as stated by the source).
  • The Lamborghini R 774-80 (DT) offers 1000 rpm at the PTO, which the VALMET 655/655-4 does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the R 774-80 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 655/655-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources