Lamborghini R 774-80 (DT) vs SAME Explorer 80 II (DT)

3 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the R 774-80 (DT) and the Explorer 80 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

3 material differences · 13 fields identical or within 5%, which is not counted as material

Lamborghini R 774-80 (DT) and SAME Explorer 80 II (DT), field by field
Field	R 774-80 (DT)	Explorer 80 II (DT)	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	SAME 1000.4 W 1	SAME 1000.4 A 1	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	209 lb·ft · 284 N·m	204 lb·ft · 276 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated, dry Lamborghini single disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	9.5 gpm · 35.8 L/min	10.7 gpm · 40.5 L/min	+13% Explorer 80 II (DT)
Pressure declared	1,740 psi · 120 bar	1,740 psi · 120 bar	—
Three-point lift at ends declared	5,964 lb · 2,705 kg	—	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,790 lb · 3,080 kg	6,724 lb · 3,050 kg	—
Wheelbase declared	94.9 in · 2,410 mm	95.1 in · 2,415 mm	—
Length declared	144.5 in · 3,670 mm	144.5 in · 3,670 mm	—
Width declared	81.1 in · 2,060 mm	81.1 in · 2,060 mm	—
Height declared	102.2 in · 2,595 mm	102.2 in · 2,595 mm	—
Ground clearance declared	20.5 in · 520 mm	20.5 in · 520 mm	—
Turning radius, braked declared	9.6 ft · 2.94 m	9.6 ft · 2.94 m	—
Fuel tank declared	116.2 qt · 110.0 L	116.2 qt · 110.0 L	—

Source

Source