Lamborghini 700 DT vs Leyland 272

13 material differences

Tractor one

1989–1996

No measured PTO figure

Tractor two

1975–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 700 DT and the 272 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini 700 DT and Leyland 272, field by field
Field	700 DT	272	Gap
Engine
Engine power, claimed claimed	69.1 hp	72.0 hp	—
Engine declared	SAME 1000.3 AT	LEYLAND-MOTORS 4/98 NT	differs
Displacement declared	3.00 L	3.77 L	+26% 272
Maximum torque declared	174 lb·ft · 236 N·m	183 lb·ft · 248 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry SLH double clutch	Dry BORG & BECK double clutch	differs
Hydraulics & hitch
Pump flow declared	7.0 gpm · 26.4 L/min	8.3 gpm · 31.6 L/min	+20% 272
Pressure declared	1,305 psi · 90 bar	—	—
Three-point lift at ends declared	5,507 lb · 2,498 kg	4,698 lb · 2,131 kg	+17% 700 DT
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,622 lb · 2,550 kg	6,684 lb · 3,032 kg	+19% 272
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	86.4 in · 2,195 mm	80.0 in · 2,032 mm	+8% 700 DT
Length declared	134.3 in · 3,410 mm	146.9 in · 3,730 mm	+9% 272
Width declared	70.1 in · 1,780 mm	80.3 in · 2,040 mm	+15% 272
Height declared	94.1 in · 2,390 mm	98.8 in · 2,510 mm	—
Ground clearance declared	15.2 in · 385 mm	15.8 in · 402 mm	—
Turning radius, braked declared	9.7 ft · 2.95 m	10.7 ft · 3.27 m	+11% 272
Fuel tank declared	82.4 qt · 78.0 L	72.1 qt · 68.2 L	+14% 700 DT

Source

Source