Lamborghini 574-70 (DT) vs VALMET 4500

12 material differences

Tractor one

1993–2004

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 574-70 (DT) and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini 574-70 (DT) and VALMET 4500, field by field
Field	574-70 (DT)	4500	Gap
Engine
Engine power, claimed claimed	69.1 hp	74.0 hp	+7% 4500
Engine declared	SAME 1000.3 AT	VALMET 320 DS	differs
Displacement declared	3.00 L	3.30 L	+10% 4500
Maximum torque declared	178 lb·ft · 241 N·m	203 lb·ft · 275 N·m	+14% 4500
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry Lamborghini double clutch	Dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	8.2 gpm · 31.0 L/min	10.3 gpm · 39.0 L/min	+26% 4500
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,294 lb · 2,855 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	4,718 lb · 2,140 kg	6,217 lb · 2,820 kg	+32% 4500
Maximum permissible mass declared	10,141 lb · 4,600 kg	—	—
Wheelbase declared	82.9 in · 2,105 mm	83.1 in · 2,112 mm	—
Length declared	128.7 in · 3,270 mm	149.2 in · 3,790 mm	+16% 4500
Width declared	70.1 in · 1,780 mm	81.5 in · 2,070 mm	+16% 4500
Height declared	92.3 in · 2,345 mm	95.1 in · 2,415 mm	—
Ground clearance declared	17.5 in · 445 mm	19.9 in · 505 mm	+13% 4500
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	61.3 qt · 58.0 L	100.4 qt · 95.0 L	+64% 4500

Source

Source