Lamborghini 554-50 (DT) vs VALMET 504

13 material differences

Tractor one

1993–2004

No measured PTO figure

Tractor two

1982–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 554-50 (DT) and the 504 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini 554-50 (DT) and VALMET 504, field by field
Field	554-50 (DT)	504	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	SAME 1000.3 A-3	VALMET D 27 B	differs
Displacement declared	3.00 L	2.69 L	+12% 554-50 (DT)
Maximum torque declared	124 lb·ft · 168 N·m	125 lb·ft · 170 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated dry Lamborghini single-disc clutch	dry Fichtel & Sachs dual clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	8.7 gpm · 33.0 L/min	7.1 gpm · 27.0 L/min	+22% 554-50 (DT)
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	3,957 lb · 1,795 kg	+62% 554-50 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,277 lb · 1,940 kg	5,930 lb · 2,690 kg	+39% 504
Maximum permissible mass declared	8,598 lb · 3,900 kg	—	—
Wheelbase declared	77.8 in · 1,975 mm	83.1 in · 2,112 mm	+7% 504
Length declared	121.5 in · 3,085 mm	142.4 in · 3,617 mm	+17% 504
Width declared	64.6 in · 1,640 mm	74.4 in · 1,890 mm	+15% 504
Height declared	88.4 in · 2,245 mm	98.4 in · 2,500 mm	+11% 504
Ground clearance declared	15.4 in · 390 mm	15.7 in · 400 mm	—
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	61.3 qt · 58.0 L	68.7 qt · 65.0 L	+12% 504

Source

Source