Lamborghini R-1256 (DT) or Landini 130 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the R-1256 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 130 DT suits loader and hydraulic implement work better on this data: 28% (13.5 L/min / 3.6 gpm) more hydraulic flow.
  • The Landini 130 DT suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini R-1256 (DT) and Landini 130 DT, with the call on each
QuestionR-1256 (DT)130 DTCall
Which puts more power through the PTO shaft?91.9 kW (123.2 hp)Traktorenlexikon, “Lamborghini 1256 DT”91.9 kW (123.2 hp)Traktorenlexikon, “Landini Legend 130”Not comparableNot comparable on power at the PTO shaft: the R-1256 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the R-1256 (DT) and the 130 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the R-1256 (DT) and the 130 DT.
Which pumps more oil for implements?48.0 L/min (12.7 gpm)Traktorenlexikon, “Lamborghini 1256 DT”61.5 L/min (16.2 gpm)Traktorenlexikon, “Landini Legend 130”AheadThe Landini 130 DT has 28% more hydraulic flow (13.5 L/min / 3.6 gpm) than the Lamborghini R-1256 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Landini Legend 130”No figureNo call on three-point lift: no figure on record for the R-1256 (DT).
Which is heavier, for traction?4,620 kg (10,185 lb)Traktorenlexikon, “Lamborghini 1256 DT”5,970 kg (13,162 lb)Traktorenlexikon, “Landini Legend 130”Ahead (a fact, not an advantage)The Landini 130 DT is 29% heavier (1,350 kg / 2,976 lb) than the Lamborghini R-1256 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,800 kg (21,605 lb)Traktorenlexikon, “Landini Legend 130”No figureNo call on maximum permissible mass: no figure on record for the R-1256 (DT).
Which has the wider choice of gears?12 to 16Traktorenlexikon, “Lamborghini 1256 DT”36 to 72Traktorenlexikon, “Landini Legend 130”AheadThe Landini 130 DT has 125% more forward gears (20 gears) than the Lamborghini R-1256 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the R-1256 (DT) and the 130 DT.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 1256 DT”40 km/h (24.9 mph)Traktorenlexikon, “Landini Legend 130”AheadThe Landini 130 DT has 33% more top speed (10.0 km/h / 6.2 mph) than the Lamborghini R-1256 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Lamborghini 1256 DT”540/1000 rpmTraktorenlexikon, “Landini Legend 130”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini 1256 DT”independentTraktorenlexikon, “Landini Legend 130”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 1256 DT”4WDTraktorenlexikon, “Landini Legend 130”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1978–19841993–1997Ahead (a fact, not an advantage)The Landini 130 DT is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 130 DT has 28% more hydraulic flow (13.5 L/min / 3.6 gpm) than the Lamborghini R-1256 (DT) (both pump flow, as stated by the source).
  • The Landini 130 DT is 29% heavier (1,350 kg / 2,976 lb) than the Lamborghini R-1256 (DT) (both unladen weight, as stated by the source).
  • The Landini 130 DT has 125% more forward gears (20 gears) than the Lamborghini R-1256 (DT) (both forward gears, as stated by the source).
  • The Landini 130 DT has 33% more top speed (10.0 km/h / 6.2 mph) than the Lamborghini R-1256 (DT) (both top speed forward, as stated by the source).
  • The Landini 130 DT is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the R-1256 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources