6 material differences · fewer than 12
Tractor oneLamborghini R-1156 (DT)1979–1984No measured PTO figureTractor twoSAME Buffalo 120 (DT)1974–1977No measured PTO figure
Which should you choose?
Read our verdict on the R-1156 (DT) and the Buffalo 120 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | R-1156 (DT) | Buffalo 120 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | SAME 1056 | SAME DA 040-1056 | differs |
| Displacement declared | 6.23 L | 6.24 L | — |
| Maximum torque declared | 298 lb·ft · 404 N·m | 308 lb·ft · 417 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal-operated dry Lamborghini single-plate clutch | Pedal operated dry Borg & Beck single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.7 gpm · 48.0 L/min | 7.9 gpm · 30.0 L/min | +60% R-1156 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,568 lb · 4,340 kg | 9,700 lb · 4,400 kg | — |
| Wheelbase declared | 107.3 in · 2,725 mm | 104.7 in · 2,660 mm | — |
| Length declared | 166.9 in · 4,240 mm | 156.7 in · 3,980 mm | +7% R-1156 (DT) |
| Width declared | 92.5 in · 2,350 mm | 85.4–113.0 in · 2,170–2,870 mm | differs |
| Ground clearance declared | 21.3 in · 540 mm | 20.9 in · 530 mm | — |
| Turning radius, braked declared | — | 13.5 ft · 4.10 m | — |
| Fuel tank declared | 126.8 qt · 120.0 L | 132.1 qt · 125.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-1156 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 1156 DT”
SAME Buffalo 120 (DT) sources
- Source: Traktorenlexikon, “SAME Buffalo 120”