Lamborghini R-1106 (DT) or Landini 12.500 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the R-1106 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 12.500 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Lamborghini R-1106 (DT) suits loader and hydraulic implement work better on this data: 16% (10.0 L/min / 2.6 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-1106 (DT) | 12.500 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 80.9 kW (108.5 hp)Traktorenlexikon, “Lamborghini 1106 DT” | 80.9 kW (108.5 hp)Traktorenlexikon, “Landini 12500” | Not comparableNot comparable on power at the PTO shaft: the R-1106 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 12.500 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-1106 (DT) and the 12.500 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-1106 (DT) and the 12.500 (DT). |
| Which pumps more oil for implements? | 72.0 L/min (19.0 gpm)Traktorenlexikon, “Lamborghini 1106 DT” | 62.0 L/min (16.4 gpm)Traktorenlexikon, “Landini 12500” | AheadThe Lamborghini R-1106 (DT) has 16% more hydraulic flow (10.0 L/min / 2.6 gpm) than the Landini 12.500 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,600 kg (10,141 lb)Traktorenlexikon, “Lamborghini 1106 DT” | 4,800 kg (10,582 lb)Traktorenlexikon, “Landini 12500” | Not comparableNot comparable on three-point lift: the R-1106 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini 1106 DT”); the 12.500 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Landini 12500”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,140 kg (9,127 lb)Traktorenlexikon, “Lamborghini 1106 DT” | 4,810 kg (10,604 lb)Traktorenlexikon, “Landini 12500” | Ahead (a fact, not an advantage)The Landini 12.500 (DT) is 16% heavier (670 kg / 1,477 lb) than the Lamborghini R-1106 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-1106 (DT) and the 12.500 (DT). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Lamborghini 1106 DT” | 12Traktorenlexikon, “Landini 12500” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-1106 (DT) and the 12.500 (DT). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 1106 DT” | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 12500” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Lamborghini 1106 DT” | 540/1000 rpmTraktorenlexikon, “Landini 12500” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Lamborghini 1106 DT” | independentTraktorenlexikon, “Landini 12500” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 1106 DT” | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 12500” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1985–1996 | 1978–1990 | Ahead (a fact, not an advantage)The Lamborghini R-1106 (DT) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini R-1106 (DT) has 16% more hydraulic flow (10.0 L/min / 2.6 gpm) than the Landini 12.500 (DT) (both pump flow, as stated by the source).
- The Landini 12.500 (DT) is 16% heavier (670 kg / 1,477 lb) than the Lamborghini R-1106 (DT) (both unladen weight, as stated by the source).
- The Lamborghini R-1106 (DT) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the R-1106 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 12.500 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the R-1106 (DT): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini 1106 DT”); the 12.500 (DT): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Landini 12500”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources