Lamborghini Agile 990 S/DT or VALMET 865-2/865?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 865-2/865 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VALMET 865-2/865 suits loader and hydraulic implement work better on this data: 58% (20.9 L/min / 5.5 gpm) more hydraulic flow and 29% (765 kg / 1,687 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini Agile 990 S/DT and VALMET 865-2/865, with the call on each
QuestionAgile 990 S/DT865-2/865Call
Which puts more power through the PTO shaft?64.7 kW (86.8 hp)Traktorenlexikon, “Lamborghini Agile S 990”64 kW (86 hp)Traktorenlexikon, “Valmet 865”Not comparableNot comparable on power at the PTO shaft: the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 865-2/865 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agile 990 S/DT and the 865-2/865.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agile 990 S/DT and the 865-2/865.
Which pumps more oil for implements?36.1 L/min (9.5 gpm)Traktorenlexikon, “Lamborghini Agile S 990”57.0 L/min (15.1 gpm)Traktorenlexikon, “Valmet 865”AheadThe VALMET 865-2/865 has 58% more hydraulic flow (20.9 L/min / 5.5 gpm) than the Lamborghini Agile 990 S/DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Lamborghini Agile S 990”3,365 kg (7,419 lb)Traktorenlexikon, “Valmet 865”AheadThe VALMET 865-2/865 has 29% more lift (765 kg / 1,687 lb) than the Lamborghini Agile 990 S/DT (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,740 kg (6,041 lb)Traktorenlexikon, “Lamborghini Agile S 990”3,190 kg (7,033 lb)Traktorenlexikon, “Valmet 865”Ahead (a fact, not an advantage)The VALMET 865-2/865 is 16% heavier (450 kg / 992 lb) than the Lamborghini Agile 990 S/DT (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the Agile 990 S/DT and the 865-2/865.
Which has the wider choice of gears?16 to 45Traktorenlexikon, “Lamborghini Agile S 990”8 to 12Traktorenlexikon, “Valmet 865”AheadThe Lamborghini Agile 990 S/DT has 33% more forward gears (4 gears) than the VALMET 865-2/865 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Agile 990 S/DT and the 865-2/865.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Agile S 990”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 865”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Lamborghini Agile S 990”540E/540 rpmTraktorenlexikon, “Valmet 865”AheadThe Lamborghini Agile 990 S/DT offers 1000 rpm at the PTO, which the VALMET 865-2/865 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini Agile S 990”independentTraktorenlexikon, “Valmet 865”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Lamborghini Agile S 990”Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 865”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–20031996–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 865-2/865 has 58% more hydraulic flow (20.9 L/min / 5.5 gpm) than the Lamborghini Agile 990 S/DT (both pump flow, as stated by the source).
  • The VALMET 865-2/865 has 29% more lift (765 kg / 1,687 lb) than the Lamborghini Agile 990 S/DT (both lift at the hitch ends, as stated by the source).
  • The VALMET 865-2/865 is 16% heavier (450 kg / 992 lb) than the Lamborghini Agile 990 S/DT (both unladen weight, as stated by the source).
  • The Lamborghini Agile 990 S/DT has 33% more forward gears (4 gears) than the VALMET 865-2/865 (both forward gears, as stated by the source).
  • The Lamborghini Agile 990 S/DT offers 1000 rpm at the PTO, which the VALMET 865-2/865 does not (as stated by the sources).
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 865-2/865 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources