Lamborghini Agile 660 S/DT or VALMET 600?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agile 660 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 600 suits loader and hydraulic implement work better on this data: 54% (19.5 L/min / 5.2 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agile 660 S/DT | 600 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 44.1 kW (59.1 hp)Traktorenlexikon, “Lamborghini Agile S 660” | 44.1 kW (59.1 hp)Traktorenlexikon, “Valmet 600” | Not comparableNot comparable on power at the PTO shaft: the Agile 660 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agile 660 S/DT and the 600. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agile 660 S/DT and the 600. |
| Which pumps more oil for implements? | 36.2 L/min (9.6 gpm)Traktorenlexikon, “Lamborghini Agile S 660” | 55.7 L/min (14.7 gpm)Traktorenlexikon, “Valmet 600” | AheadThe VALMET 600 has 54% more hydraulic flow (19.5 L/min / 5.2 gpm) than the Lamborghini Agile 660 S/DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,600 kg (5,732 lb)Traktorenlexikon, “Lamborghini Agile S 660” | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 600” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,420 kg (5,335 lb)Traktorenlexikon, “Lamborghini Agile S 660” | 3,130 kg (6,900 lb)Traktorenlexikon, “Valmet 600” | Ahead (a fact, not an advantage)The VALMET 600 is 29% heavier (710 kg / 1,565 lb) than the Lamborghini Agile 660 S/DT (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agile 660 S/DT and the 600. |
| Which has the wider choice of gears? | 16 to 30Traktorenlexikon, “Lamborghini Agile S 660” | 8 to 16Traktorenlexikon, “Valmet 600” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agile 660 S/DT and the 600. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Agile S 660” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 600” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Lamborghini Agile S 660” | 540E/540 rpmTraktorenlexikon, “Valmet 600” | AheadThe Lamborghini Agile 660 S/DT offers 1000 rpm at the PTO, which the VALMET 600 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the Agile 660 S/DT and the 600. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini Agile S 660” | 4WDTraktorenlexikon, “Valmet 600” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1996–2003 | 1997–2002 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 600 has 54% more hydraulic flow (19.5 L/min / 5.2 gpm) than the Lamborghini Agile 660 S/DT (both pump flow, as stated by the source).
- The VALMET 600 is 29% heavier (710 kg / 1,565 lb) than the Lamborghini Agile 660 S/DT (both unladen weight, as stated by the source).
- The Lamborghini Agile 660 S/DT offers 1000 rpm at the PTO, which the VALMET 600 does not (as stated by the sources).
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Agile 660 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 600 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources