8 material differences · fewer than 12
Tractor oneLamborghini R-955 (DT)1979–1985No measured PTO figureTractor twoSOMECA 940 (TD)1978–1979No measured PTO figure
Which should you choose?
Read our verdict on the R-955 (DT) and the 940 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R-955 (DT) | 940 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | SAME 1055-P | O.M.-FIAT CO 3/80 | differs |
| Displacement declared | 5.20 L | 4.94 L | — |
| Maximum torque declared | 260 lb·ft · 353 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry VALEO double clutch | — | — |
| Hydraulics & hitch | |||
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,496 lb · 3,400 kg | 8,708 lb · 3,950 kg | +16% 940 (TD) |
| Wheelbase declared | 102.4 in · 2,600 mm | 93.3 in · 2,370 mm | +10% R-955 (DT) |
| Length declared | 159.6 in · 4,055 mm | 159.4 in · 4,050 mm | — |
| Width declared | 66.1–80.7 in · 1,680–2,050 mm | 76.2–99.7 in · 1,935–2,532 mm | differs |
| Ground clearance declared | 23.6 in · 600 mm | 22.4 in · 570 mm | +5% R-955 (DT) |
| Turning radius, braked declared | — | 12.6 ft · 3.84 m | — |
| Fuel tank declared | 116.2 qt · 110.0 L | 95.1 qt · 90.0 L | +22% R-955 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R-955 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 955 DT”
SOMECA 940 (TD) sources
- Source: Traktorenlexikon, “Someca 940”