12 material differences
Tractor oneLamborghini 874-90 Turbo DT1986–1990No measured PTO figureTractor twoMassey Ferguson MF 10851973–1978No measured PTO figure
Which should you choose?
Read our verdict on the 874-90 Turbo DT and the MF 1085 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 874-90 Turbo DT | MF 1085 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.8 hp | 86.8 hp | — |
| Engine declared | SAME 1000.4 WT | Perkins A 4.318 | differs |
| Displacement declared | 4.00 L | 5.21 L | +30% MF 1085 |
| Maximum torque declared | 225 lb·ft · 305 N·m | 256 lb·ft · 347 N·m | +14% MF 1085 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal-operated dry Lamborghini single-disc clutch | Pedal-operated dry LUK single-plate clutch with 305 mm diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.4 gpm · 39.5 L/min | 7.0 gpm · 26.5 L/min | +49% 874-90 Turbo DT |
| Pressure declared | 1,740 psi · 120 bar | 3,086 psi · 213 bar | +78% MF 1085 |
| Three-point lift, at the coupling points declared | 6,349 lb · 2,880 kg | 6,173 lb · 2,800 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,614 lb · 3,000 kg | 8,490 lb · 3,851 kg | +28% MF 1085 |
| Maximum permissible mass declared | — | 13,228 lb · 6,000 kg | — |
| Wheelbase declared | 95.1 in · 2,415 mm | 97.2 in · 2,470 mm | — |
| Length declared | 145.2 in · 3,687 mm | 153.9 in · 3,910 mm | +6% MF 1085 |
| Width declared | 73.6–101.2 in · 1,870–2,570 mm | 114.2 in · 2,900 mm | differs |
| Ground clearance declared | 20.5 in · 520 mm | 16.5 in · 420 mm | +24% 874-90 Turbo DT |
| Fuel tank declared | 89.8 qt · 85.0 L | 179.6 qt · 170.0 L | +100% MF 1085 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini 874-90 Turbo DT sources
Source
- Source: Traktorenlexikon, “Lamborghini 874-90 Turbo DT”
- Source: Traktorenlexikon, “Lamborghini 874-90 DT A Grand Prix”
Massey Ferguson MF 1085 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 1085”
- Source: Traktorenlexikon, “Massey Ferguson MF 1080”