Lamborghini R-854 (DT) or VALMET 802/802-4?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the R-854 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 802/802-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Lamborghini R-854 (DT) suits loader and hydraulic implement work better on this data: 31% (900 kg / 1,984 lb) more three-point lift.
- The VALMET 802/802-4 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-854 (DT) | 802/802-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 60.3 kW (80.9 hp)Traktorenlexikon, “Lamborghini 854 DT” | 60.3 kW (80.9 hp)Traktorenlexikon, “Valmet 802” | Not comparableNot comparable on power at the PTO shaft: the R-854 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 802/802-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-854 (DT) and the 802/802-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-854 (DT) and the 802/802-4. |
| Which pumps more oil for implements? | — | 43.0 L/min (11.4 gpm)Traktorenlexikon, “Valmet 802” | No figureNo call on hydraulic flow: no figure on record for the R-854 (DT). |
| Which lifts more on the three-point hitch? | 3,800 kg (8,378 lb)Traktorenlexikon, “Lamborghini 854 DT” | 2,900 kg (6,393 lb)Traktorenlexikon, “Valmet 802” | AheadThe Lamborghini R-854 (DT) has 31% more lift (900 kg / 1,984 lb) than the VALMET 802/802-4 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,185 kg (7,022 lb)Traktorenlexikon, “Lamborghini 854 DT” | 3,539 kg (7,802 lb)Traktorenlexikon, “Valmet 802” | Ahead (a fact, not an advantage)The VALMET 802/802-4 is 11% heavier (354 kg / 780 lb) than the Lamborghini R-854 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-854 (DT) and the 802/802-4. |
| Which has the wider choice of gears? | 12 to 16Traktorenlexikon, “Lamborghini 854 DT” | 8Traktorenlexikon, “Valmet 802” | AheadThe Lamborghini R-854 (DT) has 50% more forward gears (4 gears) than the VALMET 802/802-4 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-854 (DT) and the 802/802-4. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Lamborghini 854 DT” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 802” | AheadThe VALMET 802/802-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the Lamborghini R-854 (DT) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Lamborghini 854 DT” | 540 rpmTraktorenlexikon, “Valmet 802” | AheadThe Lamborghini R-854 (DT) offers 1000 rpm at the PTO, which the VALMET 802/802-4 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 802” | No figureNo call on PTO independence: not stated for the R-854 (DT). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 854 DT” | Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 802” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1976–1985 | 1980–1983 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini R-854 (DT) has 31% more lift (900 kg / 1,984 lb) than the VALMET 802/802-4 (both lift at the hitch ends, as stated by the source).
- The VALMET 802/802-4 is 11% heavier (354 kg / 780 lb) than the Lamborghini R-854 (DT) (both unladen weight, as stated by the source).
- The Lamborghini R-854 (DT) has 50% more forward gears (4 gears) than the VALMET 802/802-4 (both forward gears, as stated by the source).
- The VALMET 802/802-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the Lamborghini R-854 (DT) (both top speed forward, as stated by the source).
- The Lamborghini R-854 (DT) offers 1000 rpm at the PTO, which the VALMET 802/802-4 does not (as stated by the sources).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the R-854 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 802/802-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources