7 material differences · fewer than 12
Tractor oneLamborghini 784 DT1980–1985No measured PTO figureTractor twoRenault 80-14 TX1984–1987No measured PTO figure
Which should you choose?
Read our verdict on the 784 DT and the 80-14 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 784 DT | 80-14 TX | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 77.0 hp | 77.0 hp | — |
| Engine declared | SAME 1054-P | MWM D 226-4 | differs |
| Displacement declared | 4.16 L | 4.15 L | — |
| Maximum torque declared | — | 190 lb·ft · 258 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 80-14 TX |
| Clutch declared | — | Dry LuK double clutch, pedal-operated driving clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 10.9 gpm · 41.4 L/min | — |
| Pressure declared | — | 1,595 psi · 110 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,614 lb · 3,000 kg | 8,378 lb · 3,800 kg | +27% 80-14 TX |
| Wheelbase declared | 90.4 in · 2,297 mm | 94.3 in · 2,394 mm | — |
| Length declared | 140.9 in · 3,580 mm | 159.8 in · 4,058 mm | +13% 80-14 TX |
| Width declared | 80.7 in · 2,050 mm | 78.0–87.8 in · 1,980–2,229 mm | differs |
| Ground clearance declared | 21.7 in · 550 mm | 14.8 in · 377 mm | +46% 784 DT |
| Turning radius, braked declared | — | 16.4 ft · 5.01 m | — |
| Fuel tank declared | 84.5 qt · 80.0 L | 77.1 qt · 73.0 L | +10% 784 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini 784 DT sources
- Source: Traktorenlexikon, “Lamborghini 784 DT”
- Source: Traktorenlexikon, “Lamborghini 854 DT”
Renault 80-14 TX sources
- Source: Traktorenlexikon, “Renault 80-14 TX R7762”
- Source: Traktorenlexikon, “Fendt Farmer 108 S/SA”