14 material differences

Tractor oneLamborghini 775 F-Plus1992–2005No measured PTO figureTractor twoVALMET 45001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 775 F-Plus and the 4500 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

14 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini 775 F-Plus and VALMET 4500, field by field
Field775 F-Plus4500Gap
Engine
Engine power, claimed claimed74.0 hp74.0 hp—
Engine declaredSAME 1000.3 WT 2VALMET 320 DSdiffers
Displacement declared3.00 L3.30 L+10% 4500
Maximum torque declared183 lb·ft · 248 N·m203 lb·ft · 275 N·m+11% 4500
Transmission
Top speed declared24.9 mph · 40 km/h18.6 mph · 30 km/h+33% 775 F-Plus
Clutch declaredPedal operated dry single disc clutchDry double clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared14.8 gpm · 56.0 L/min10.3 gpm · 39.0 L/min+44% 775 F-Plus
Pressure declared1,305 psi · 90 bar2,901 psi · 200 bar+122% 4500
Three-point lift, at the coupling points declared6,393 lb · 2,900 kg6,294 lb · 2,855 kg—
Rear PTO speeds declared540 rpm / 1000 rpm540E/540 rpmdiffers
Weight & dimensions
Unladen weight declared5,787 lb · 2,625 kg6,217 lb · 2,820 kg+7% 4500
Maximum permissible mass declared8,818 lb · 4,000 kg——
Wheelbase declared82.0 in · 2,082 mm83.1 in · 2,112 mm—
Length declared139.8 in · 3,550 mm149.2 in · 3,790 mm+7% 4500
Width declared57.5–68.9 in · 1,460–1,750 mm81.5 in · 2,070 mmdiffers
Ground clearance declared12.6 in · 320 mm19.9 in · 505 mm+58% 4500
Turning radius, braked declared9.8 ft · 3.00 m12.8 ft · 3.90 m+30% 4500
Fuel tank declared89.8 qt · 85.0 L100.4 qt · 95.0 L+12% 4500

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lamborghini 775 F-Plus sources

Source
  • Source: Traktorenlexikon, “Lamborghini 775 F-Plus”
  • Source: Traktorenlexikon, “Lamborghini Sprint 664-65 (DT)”

VALMET 4500 sources

Source
  • Source: Traktorenlexikon, “Valmet 4500”
  • Source: Traktorenlexikon, “Valmet 465”