Lamborghini 774-80 DT vs SAME Explorer 80 II (DT)

8 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 774-80 DT and the Explorer 80 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Lamborghini 774-80 DT and SAME Explorer 80 II (DT), field by field
Field	774-80 DT	Explorer 80 II (DT)	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	SAME 1000.4 W 1	SAME 1000.4 A 1	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	193 lb·ft · 261 N·m	204 lb·ft · 276 N·m	+6% Explorer 80 II (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry Lamborghini single-plate clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	9.5 gpm · 35.8 L/min	10.7 gpm · 40.5 L/min	+13% Explorer 80 II (DT)
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift at ends declared	5,964 lb · 2,705 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,997 lb · 2,720 kg	6,724 lb · 3,050 kg	+12% Explorer 80 II (DT)
Wheelbase declared	92.9 in · 2,360 mm	95.1 in · 2,415 mm	—
Length declared	142.1 in · 3,610 mm	144.5 in · 3,670 mm	—
Width declared	82.3 in · 2,090 mm	81.1 in · 2,060 mm	—
Height declared	95.5 in · 2,425 mm	102.2 in · 2,595 mm	+7% Explorer 80 II (DT)
Ground clearance declared	19.3 in · 490 mm	20.5 in · 520 mm	+6% Explorer 80 II (DT)
Turning radius, braked declared	9.6 ft · 2.94 m	9.6 ft · 2.94 m	—
Fuel tank declared	89.8 qt · 85.0 L	116.2 qt · 110.0 L	+29% Explorer 80 II (DT)

Source

Source