Lamborghini R 583 (DT) or VALMET 255 (255-4)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the R 583 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 255 (255-4) suits loader and hydraulic implement work better on this data: 56% (14.0 L/min / 3.7 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R 583 (DT) | 255 (255-4) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 39 kW (52 hp)Traktorenlexikon, “Lamborghini 583 DT” | 39 kW (52 hp)Traktorenlexikon, “Valmet 255” | Not comparableNot comparable on power at the PTO shaft: the R 583 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R 583 (DT) and the 255 (255-4). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R 583 (DT) and the 255 (255-4). |
| Which pumps more oil for implements? | 25.0 L/min (6.6 gpm)Traktorenlexikon, “Lamborghini 583 DT” | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 255” | AheadThe VALMET 255 (255-4) has 56% more hydraulic flow (14.0 L/min / 3.7 gpm) than the Lamborghini R 583 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,500 kg (5,512 lb)Traktorenlexikon, “Lamborghini 583 DT” | 2,580 kg (5,688 lb)Traktorenlexikon, “Valmet 255” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 1,970 kg (4,343 lb)Traktorenlexikon, “Lamborghini 583 DT” | 2,820 kg (6,217 lb)Traktorenlexikon, “Valmet 255” | Ahead (a fact, not an advantage)The VALMET 255 (255-4) is 43% heavier (850 kg / 1,874 lb) than the Lamborghini R 583 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R 583 (DT) and the 255 (255-4). |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Lamborghini 583 DT” | 8 to 12Traktorenlexikon, “Valmet 255” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R 583 (DT) and the 255 (255-4). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 583 DT” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 255” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Lamborghini 583 DT” | 540/1000 rpmTraktorenlexikon, “Valmet 255” | AheadThe VALMET 255 (255-4) offers 1000 rpm at the PTO, which the Lamborghini R 583 (DT) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Lamborghini 583 DT” | independentTraktorenlexikon, “Valmet 255” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 583 DT” | 2WD / 4WDTraktorenlexikon, “Valmet 255” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1982–1985 | 1992–1994 | Ahead (a fact, not an advantage)The VALMET 255 (255-4) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 255 (255-4) has 56% more hydraulic flow (14.0 L/min / 3.7 gpm) than the Lamborghini R 583 (DT) (both pump flow, as stated by the source).
- The VALMET 255 (255-4) is 43% heavier (850 kg / 1,874 lb) than the Lamborghini R 583 (DT) (both unladen weight, as stated by the source).
- The VALMET 255 (255-4) offers 1000 rpm at the PTO, which the Lamborghini R 583 (DT) does not (as stated by the sources).
- The VALMET 255 (255-4) is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the R 583 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 255 (255-4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources