Lamborghini R 583 (DT) vs Massey Ferguson MF 355 (A)

11 material differences · fewer than 12

Tractor one

1982–1985

No measured PTO figure

Tractor two

1988–1994

No measured PTO figure

Which should you choose?

Read our verdict on the R 583 (DT) and the MF 355 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Lamborghini R 583 (DT) and Massey Ferguson MF 355 (A), field by field
Field	R 583 (DT)	MF 355 (A)	Gap
Engine
Engine power, claimed claimed	52 hp	52 hp	—
Engine declared	SAME FL-1003	Perkins AT 3.152-4	differs
Displacement declared	2.83 L	2.50 L	+13% R 583 (DT)
Maximum torque declared	125 lb·ft · 169 N·m	137 lb·ft · 186 N·m	+10% MF 355 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry VALEO double clutch	Pedal-operated, dry and air-cooled single clutch	differs
Hydraulics & hitch
Pump flow declared	6.6 gpm · 25.0 L/min	13.9 gpm · 52.5 L/min	+110% MF 355 (A)
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	5,512 lb · 2,500 kg	—	—
Rear PTO speeds declared	540 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	4,343 lb · 1,970 kg	5,842 lb · 2,650 kg	+35% MF 355 (A)
Wheelbase declared	78.9 in · 2,004 mm	81.9 in · 2,080 mm	—
Length declared	129.9 in · 3,300 mm	133.9 in · 3,400 mm	—
Width declared	63.0 in · 1,600 mm	70.9 in · 1,800 mm	+13% MF 355 (A)
Height declared	86.6 in · 2,200 mm	94.9 in · 2,410 mm	+10% MF 355 (A)
Ground clearance declared	18.5 in · 470 mm	—	—
Fuel tank declared	57.1 qt · 54.0 L	71.9 qt · 68.0 L	+26% MF 355 (A)

Source

Source