9 material differences · fewer than 12
Tractor oneLamborghini R 483 (DT)1982–1985No measured PTO figureTractor twoLandini 5860 (DT) TL 38 N/M (TL-38 DT/M)1988–2000No measured PTO figure
Which should you choose?
Read our verdict on the R 483 (DT) and the 5860 (DT) TL 38 N/M (TL-38 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | R 483 (DT) | 5860 (DT) TL 38 N/M (TL-38 DT/M) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 47.3 hp | — |
| Engine declared | SAME 983-L | Perkins D 3152 | differs |
| Displacement declared | 2.72 L | 2.50 L | +9% R 483 (DT) |
| Maximum torque declared | 134 lb·ft · 182 N·m | 130 lb·ft · 176 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry VALEO double clutch | Dry and air-cooled OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.6 gpm · 25.0 L/min | — | — |
| Pressure declared | — | 2,756 psi · 190 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,321 lb · 1,960 kg | 4,674 lb · 2,120 kg | +8% 5860 (DT) TL 38 N/M (TL-38 DT/M) |
| Wheelbase declared | 78.9 in · 2,004 mm | 77.0 in · 1,955 mm | — |
| Length declared | 129.9 in · 3,300 mm | 135.8 in · 3,450 mm | — |
| Width declared | 61.8–85.4 in · 1,570–2,170 mm | 64.2 in · 1,630 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 15.4 in · 390 mm | +21% R 483 (DT) |
| Turning radius, braked declared | — | 11.4 ft · 3.46 m | — |
| Fuel tank declared | 42.3 qt · 40.0 L | 65.5 qt · 62.0 L | +55% 5860 (DT) TL 38 N/M (TL-38 DT/M) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lamborghini R 483 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 483 DT”
Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) sources
- Source: Traktorenlexikon, “Landini R 5560 L (DT)”
- Source: Traktorenlexikon, “Lindner BF 420 SN/SA”