Lamborghini 135 DT B Formula or VALMET 8350 HiTech?

Which should you choose?

On performance, every comparable figure that differs favours the VALMET 8350 HiTech: hydraulic flow and maximum permissible mass.

  • The VALMET 8350 HiTech suits loader and hydraulic implement work better on this data: 33% (18.9 L/min / 5.0 gpm) more hydraulic flow.
  • The VALMET 8350 HiTech suits road haulage better on this data: 11% (900 kg / 1,984 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Lamborghini 135 DT B Formula and VALMET 8350 HiTech, with the call on each
Question135 DT B Formula8350 HiTechCall
Which puts more power through the PTO shaft?92.5 kW (124.0 hp)Traktorenlexikon, “Lamborghini 135 DT B Formula”93.2 kW (125.0 hp)Traktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 135 DT B Formula and the 8350 HiTech.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 135 DT B Formula and the 8350 HiTech.
Which pumps more oil for implements?57.5 L/min (15.2 gpm)Traktorenlexikon, “Lamborghini 135 DT B Formula”76.4 L/min (20.2 gpm)Traktorenlexikon, “Valmet Mega-8350 HiTech”AheadThe VALMET 8350 HiTech has 33% more hydraulic flow (18.9 L/min / 5.0 gpm) than the Lamborghini 135 DT B Formula (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,200 kg (13,669 lb)Traktorenlexikon, “Lamborghini 135 DT B Formula”6,800 kg (14,991 lb)Traktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?4,880 kg (10,759 lb)Traktorenlexikon, “Lamborghini 135 DT B Formula”5,720 kg (12,610 lb)Traktorenlexikon, “Valmet Mega-8350 HiTech”Ahead (a fact, not an advantage)The VALMET 8350 HiTech is 17% heavier (840 kg / 1,852 lb) than the Lamborghini 135 DT B Formula (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,100 kg (17,857 lb)Traktorenlexikon, “Lamborghini 135 DT B Formula”9,000 kg (19,842 lb)Traktorenlexikon, “Valmet Mega-8350 HiTech”AheadThe VALMET 8350 HiTech has 11% higher maximum permissible mass (900 kg / 1,984 lb) than the Lamborghini 135 DT B Formula (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24 to 72Traktorenlexikon, “Lamborghini 135 DT B Formula”36Traktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 135 DT B Formula and the 8350 HiTech.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini 135 DT B Formula”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini 135 DT B Formula”540/1000 rpmTraktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini 135 DT B Formula”No figureNo call on PTO independence: not stated for the 8350 HiTech.
Which drives on both axles?4WDTraktorenlexikon, “Lamborghini 135 DT B Formula”4WDTraktorenlexikon, “Valmet Mega-8350 HiTech”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–1998–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET 8350 HiTech has 33% more hydraulic flow (18.9 L/min / 5.0 gpm) than the Lamborghini 135 DT B Formula (both pump flow, as stated by the source).
  • The VALMET 8350 HiTech is 17% heavier (840 kg / 1,852 lb) than the Lamborghini 135 DT B Formula (both unladen weight, as stated by the source).
  • The VALMET 8350 HiTech has 11% higher maximum permissible mass (900 kg / 1,984 lb) than the Lamborghini 135 DT B Formula (both maximum permissible mass, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources