Lamborghini 115 DT Formula (Traktorenlexikon) vs VALMET 8100

13 material differences

Tractor one

1996–2000

No measured PTO figure

Tractor two

1990–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 115 DT Formula and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Lamborghini 115 DT Formula (Traktorenlexikon) and VALMET 8100, field by field
Field	115 DT Formula	8100	Gap
Engine
Engine power, claimed claimed	113.5 hp	118.4 hp	—
Engine declared	SAME 1000.6 W	VALMET 620 D	differs
Displacement declared	6.00 L	6.59 L	+10% 8100
Maximum torque declared	290 lb·ft · 393 N·m	311 lb·ft · 421 N·m	+7% 8100
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.5 L/min	17.8 gpm · 67.4 L/min	+17% 8100
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% 8100
Three-point lift at ends declared	10,582 lb · 4,800 kg	—	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,318 lb · 4,680 kg	10,141 lb · 4,600 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% 115 DT Formula
Length declared	166.9 in · 4,240 mm	186.8 in · 4,745 mm	+12% 8100
Width declared	88.2 in · 2,240 mm	86.6 in · 2,200 mm	—
Height declared	110.2 in · 2,800 mm	108.7 in · 2,760 mm	—
Ground clearance declared	17.1 in · 435 mm	18.7 in · 475 mm	+9% 8100
Turning radius, braked declared	16.5 ft · 5.02 m	15.5 ft · 4.71 m	+7% 115 DT Formula
Fuel tank declared	253.6 qt · 240.0 L	174.4 qt · 165.0 L	+45% 115 DT Formula

Source

Source